GTI

Novotest – Novedades
Novotest – Hardness Testing
Novotest – Ultrasonic Testing
Novotest – Coating Testing
Novotest – Construction Materials Testing
Novotest – Magnetic Testing

Phased Array Flaw Detector NOVOTEST UD4701PA

Portable ultrasonic flaw detector NOVOTEST UD4701PA – device for detecting defects in finished products, semi-finished products and welded joints, as well as determining their coordinates and using DAC and DGS functios. Equipped with a contrast color TFT display (resolution of 640×480), reliable enclosure, the device is always ready for operation, both in the laboratory and in locations with aggressive environmental influences such as temperature, dirt and precipitation.

In addition to traditional functions, the flaw detector has an input of a 2-axis encoder, which allows user to connect various scanners to build C-, B- and other scans and TOFD scan of the tested part of the product.

Use the device may not even highly be qualified specialists, since adjustment and calibration takes less than 5 minutes, and pre-defined functions allow for quick inspection and ensure the quality of the results.

NOVOTEST UD4701PA allows user to assess the state of products or structural elements on site and without pre-testing. This flaw detector is indispensable in such industries like construction, machine building, production of rolled metal, power engineering, research works, chemistry, mining etc.

Phased Array Flaw Detector NOVOTEST UD4701PA

Ultrasonic Flaw Detector NOVOTEST UD3701

Ultrasonic Flaw Detector NOVOTEST UD3701 is designed to detect defects, such as discontinuity and heterogeneity in objects, weld joints quality, to measure the depth and position of flaws, thickness measurements, measurements of velocity and attenuation of ultrasonic waves for different materials.

Ultrasonic Flaw Detector NOVOTEST UD3701 has large 7 inch touch screen display and powerful, lightweight, portable and ergonomic impact-resistant metal casing, and is the best choice for expert ultrasonic testing. Ultrasonic Flaw Detector NOVOTEST UD3701 allows user to measure the thickness of products with hight accuracy, the signal can be viewed in the form of A-scan and B-scans and has all the features of the full testing documentation.

Ultrasonic Flaw Detector NOVOTEST UD3701

Ultrasonic Flaw Detector NOVOTEST UD2301

An ultrasonic flaw detector is designed to search for voids and inhomogeneities inside the materials under testing with ultrasound. It is the most common device in the world for non-destructive testing of metal (and other materials with low attenuation of ultrasonic waves) products in production, as well as objects in operation.

Ultrasonic Flaw Detector NOVOTEST UD2301 is a powerful, ergonomic, portable device that has all the functions of a general industrial ultrasonic flaw detectors and can be used in laboratories and workshops, and is perfect for field use.

Ultrasonic Flaw Detector NOVOTEST UD2301

EMA Thickness Gauge NOVOTEST UT-3M-EMA

EMA Thickness Gauge NOVOTEST UT-3M-EMA is a new development of the NOVOTEST company, which will allow our users to solve not only the standard tasks of testing the thickness of metal products, but also to carry out tests in cases where traditional methods, such as piezo-ultrasonic, laser-optical, X-ray, mechanical, etc. – not applicable.

Electromagnetic-acoustic (EMA) technology for measuring thickness is based on the excitation of ultrasonic vawes in the material by the generator of the device’s probe, and fixing the path time of ultrasonic waves in the material.

EMA Thickness Gauge NOVOTEST UT-3M-EMA

Ultrasonic Thickness Gauge NOVOTEST UT-1M

Ultrasonic Thickness Gauge NOVOTEST UT-1M is used for operational non-destructive testing of the thickness of products with one-way access, at the moment this method is the most common in the world for solving such tasks.

The method is based on the property of materials to conduct ultrasound, ultrasonic wawes are excited with the piezoceramic plate in the transducer and penetrates into the material through the couplant, then reflected from the bottom surface of the tested sample, and returns to the transducer. Based on the obtained sound transit time in the material, the device calculates the thickness in accordance with the velocity of propagation of ultrasonic waves in the test sample. The thickness value is displayed on the device’s display, the measurement process takes about 1 second.

Ultrasonic Thickness Gauge NOVOTEST UT-1M

Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP

Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP is a special version of ultrasonic thickness gauge, it is designed to measure the thickness of various materials and products for one-way access in difficult climatic conditions – in dusty rooms, in high humidity, in the rain – when the use of a conventional ultrasonic thickness gauge is impossible.

It is used to control the thickness of materials such as glass, metals and alloys, polymers, plastic and many others. Objects can be pipes, rolled products, structures, products and parts for various purposes and shapes.

Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST is a special version of the thickness gauge in a metal enclosure, which is designed for extreme operating conditions, when there is a possibility of the device dropping or other damage of the unit during operation. The durable aluminum bodie’s profile withstands high static and dynamic compression loads, which allows the operator to use the device “carelessly”.

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST is designed to measure the thickness of products with low attenuation of ultrasonic vibrations, with one-way access to them during their manufacture and operation.

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST

UT-Probes (Transducers)

We produce probes (transducers) of general type, and special-purpose, standard and custom: straight beam, angle beam, dual element, ground in and others.

All the transducers are designed for using with ultrasonic flaw detectors.

Connector type: Lemo 00 (other connectors – by request).

Contact dual-element transducers are designed for testing welded and brazed joints of the elements of metal structures, pipelines for detection the different kinds of defects (cracks, nonmetallic particles, pores, lack of fusion, scratches, surface cracks, etc.).

Straight beam contact transducers are designed to detect internal defects (pores, cracks, delamination and others), also they used for searching local thinning walls in metal structures and walls of the product, including the low-alloyed and austenitic steels products.

Transducer grounds are designed to detect internal defects of pipes and for searching local thinning walls of the pipes, including the low-alloyed and austenitic steels products.

UT-Probes (Transducers)

Reference Blocks

V1 and V2 – are common used reference (calibration) blocks for UT testing.

Reference Block V1 allows to:

determine the insertion point of ultrasonic oscillations and distance from the piezoceramic plate to the probe housing with accuracy ± 0,5mm;
define the angle of input of the ultrasonic oscillations with accuracy ±1 angle degree;
define the uncontrollable (dead) zone (for steel) straight beam ultrasonic piezoelectric transducers;
determine the linearity of ultrasonic scanning horizontally;
configure the speed and sensitivity of the scan of straight beam, angle beam and dual element piezoelectric transducers.

Reference Block V2 allows to:

calibrate the scanning of flaw detectors through the expansion velocity of ultrasonic waves, working with straight beam piezoelectric transducers;
calibrate the scanning of flaw detectors through the expansion velocity of ultrasonic waves, working with angle beam piezoelectric transducers;
set conditional sensitivity of ultrasonic flaw detectors with straight beam and angle beam piezoelectric transducers;
determine the output point of ultrasonic oscillations and distance from the piezoceramic plate to the probe housing;
define the angle of input of the ultrasonic oscillations into steel.

But there are available other types of blocks in accordance to different standards (ISO, DIN, etc.). If need UT or PAUT blocks of other standards, please send enquiry.

Reference Blocks

Calibration Blocks

Calibration blocks of enterprises with notches are used to configure the sensitivity and duration of scan of ultrasonic flaw detectors for testing of various products (mainly flat sheets and pipes).

Calibration blocks of enterprises with notches (corner reflectors) are made of the same material as the tested object, wherein the geometry (thickness and surface radius of standard sample) has the same characteristics as tested item.

Calibration Blocks

Thickness Gauge Calibration Blocks

Set of KUSOT-180 ultrasonic thickness calibration blocks is intended for examination and for initial inspection at manufacturing of ultrasonic contact thickness gauges.

KUSOT-180 сalibration blocks are also used for verification, calibration and metrological certification of ultrasonic thickness gauges.

KUSOT-180 сalibration blocks are used in the following ranges:

0,2-300 mm on steel
1-300 mm on duralumin
1-100 mm on brass

The kit consists of the thickness samples, combined in sets and packed in a case.

Step-calibration blocks (Step wedge calibration blocks) are used for adjustment and calibration of ultrasonic thickness gauges.

Linear dimensions of Step wedge calibration blocks are individually available by a customer request and according to the acting regulatory and technical documentation.

Phased Array Flaw Detector NOVOTEST UD4701PA

Ultrasonic Flaw Detector NOVOTEST UD3701

Ultrasonic Flaw Detector NOVOTEST UD2301

EMA Thickness Gauge NOVOTEST UT-3M-EMA

Ultrasonic Thickness Gauge NOVOTEST UT-1M

Ultrasonic Thickness Gauge NOVOTEST UT-1M-IP

Ultrasonic Thickness Gauge NOVOTEST UT-1M-ST

UT-Probes (Transducers)

Reference Blocks

Calibration Blocks

Thickness Gauge Calibration Blocks

Argentina

Estados Unidos

Perú

Venezuela

Seguinos